Air Conditioners with Filter and Thermostat Controller
Product Description
häwa air conditioners can be us as independent devices up to an ambient temperature of max. 50/55 °C. They have two separate IP54-sealed air circuits, equipped with 1 fan each.
Heat transfer from the inside of the cabinet to the outside takes place through active cooling (refrigerating unit).
This allows to cool down the temperature in the cabinet below the ambient temperature. häwa air conditioners operate with the CFC-free, ozone-friendly refrigerant R134a.
External fan operates only when cooling, which avoids unnecessary noise and pollution.
The temperature is set at the factory to +35 °C. It can be field-adjusted after removal of the cover panel, or for devices equipped with a display, from the outside.
A control line for the door switch, separately connected for units with a cooling capacity of 800 W or more, permits remote ON/OFF switching of the unit without power disconnect. General fault signal as potential-free changeover contact fed out in the control line.
Free from silicone compounds, PCB, PCT, formaldehyde and cadmium.
Thermostat controller system: A capillary themostat controls the compressor and the external fan (for small air conditioners directly, for larger units via a contactor). The switching hysteresis is about 6 K.
For devices of 1000 W or more, the condensation is drained off directly via a discharge nozzle in the bottom panel.
Power connection via a power cord fed through the rear panel of the device.
Technical Data
- Order No.: 3129-0400-23-07
- Frequency: 50 Hz/60 Hz
- Protection type: IP54
- Ambient temperature: from: +20 °C to: +50 °C
- Temperature: Factory set 35 °C (Thermostatic control) accessible behind front cover
- Refrigerant: R134a (GWP 1430) 160 g / 5,6 oz
- Cooling capacity: 370 W (L35-L35) / 170 W (L35-L50)
- Nominal voltage: 230 V AC
- LUFTLEISTUNG: Cold/warm side: each 860/1170 m³/h
- Material: Sheet steel
- Control system: Thermostat
- Rated capacity: 360 / 400 W
- Mounting type: external/internal installation
- Power supply: power cord
- Disign pressure: HP 406 psi (2800 kPa) / LP 188 psi (1300 kPa)
- nominal current: at 50 Hz: 1,9 A
at 60 Hz: 2,1 A - Start-up current: 3,2 A
- Approval: CE
- Weight: 13.8 kg
-
Dimensions (WxHxD): 270 mm 520 mm Depth : 122 mm
- Surface: Powder coating RAL 7035, texture finish
-
Storage temperature: from : -20 °C to : +70 °C
- Fuse: 6 AT
- Type: K400F
Scope of Delivery
- Air conditioner
- Power cord
- Rubber seals
- Mounting hardware
Accessories
Replacement Filter Pads
![Replacement Filter Pads for Air Conditioners Replacement Filter Pads for Air Conditioners](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
Replacement Filter Pads for Air Conditioners
Width | 115 mm |
Height | 115 mm |
Suitable for | Air conditioning unit K400F/K400FQ |