Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
Product Description
For punching with "mobile devices".
Low tool wear through optimum cutting geometry.
Easy removal of the deformed waste piece.
Quick, precise and burr-free punching.
Technical Data
- Order No.: 2623-0841-20-00
- Max. sheet metal thickness: Steel 3 mm; 11 ga
Stainless steel 2 mm; 14 ga - Product range: for mobile devices
- Draw stud: Ø 19 mm / 3/4"
- Pilot hole Ø: 20 mm
- Diameter dimensions: 41.2 mm
Notice
- You need a häwa punching pump or a häwa hydraulic cylinder. If this hole tool is compatible with your häwa punching unit, please refer to the "Tool hint - Hole punch for mobile devices" under "Downloads".
- The max. sheet metal thickness to be punched is also dependent on the punching device.
Scope of Delivery
- 1 round punch, consisting of punch and die
Accessories
Accessories Punching Tools
Accessories for sheet metal processing
Suitable for
Accessories
Accessories Punching Tools
Accessories for Punching Pumps
Mobile hydraulic cylinders
![Hydraulic Cylinder Power 19 Hydraulic Cylinder Power 19](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2611-7600-01-00
Hydraulic Cylinder Power 19
Product range | for mobile devices |
Suitable for | Round punches up to ø 135 mm; 5.31“ / square punches 103 mm; 4.06“ / rectangular punches up to a diagonal size of 145 mm; 5.71“ |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Screw receptacle | 19 mm (3/4”) draw studs |
![Hydraulic Cylinder Power 25 Hydraulic Cylinder Power 25](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2611-7600-02-00
Hydraulic Cylinder Power 25
Product range | for mobile devices |
Suitable for | Round punches up to ø 185 mm; 7.28“ / square punches 140 mm; 5.51“ / rectangular punches up to a diagonal size of 195 mm; 7.68“ |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Screw receptacle | Thread M25 x 1,5 |
![Hydraulic Cylinder 19 (3/4”) Hydraulic Cylinder 19 (3/4”)](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2684-7600-01-00
Hydraulic Cylinder 19 (3/4”)
Product range | for mobile devices |
Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Screw receptacle | 19 mm (3/4”) draw studs |
Draw Studs and Nuts
Draw studs for manual operation
Punching Tools
![Powerman Junior Powerman Junior](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2622-7200-02-00
Powerman Junior
Type | without round punches |
Suitable for | round punches up to ø 50.5 mm; 1.99" / square punches up to 25.4 mm; 1" / rectangular punches up to 37.5 mm; 1.48" diagonal |
Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
Punching force | 40 kN |
![Powerman Junior Powerman Junior](/fileadmin/xmlimport/assets/IM0004611.jpg)
2622-7204-02-01
Powerman Junior
Type | with metric round punch kit |
Suitable for | round punches up to ø 50.5 mm; 1.99" / square punches up to 25.4 mm; 1" / rectangular punches up to 37.5 mm; 1.48" diagonal |
Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
Punching force | 40 kN |
![Powerman Vario Powerman Vario](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2626-7200-01-00
Powerman Vario
Type | without round punches in sheet metal case |
Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 50 kN |
![Powerman Vario Powerman Vario](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2626-7206-01-00
Powerman Vario
Type | PG1 with round punches from PG9 to PG21 in plastic case |
Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 50 kN |
![Powerman Vario Powerman Vario](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2626-7206-02-00
Powerman Vario
Type | PG2 with round punches from PG9 to PG29 in plastic case |
Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 50 kN |
![Powerman Vario Powerman Vario](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2626-7207-01-01
Powerman Vario
Type | with metric round punches from M12 to M50 in plastic case |
Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 50 kN |
![Powerlec Vario Powerlec Vario](/fileadmin/xmlimport/assets/IM0004360.jpg)
2629-7200-01-01
Powerlec Vario
Type | with metric round punch kit |
Suitable for | round punches up to ø 80 mm, 3.15" / square punches up to 68 mm; 2.68" / rectangular punches up to 96 mm; 3.78" diagonal |
Max. sheet metal thickness | Sheet steel to 2,5 mm; 12 ga / Stainless steel to 2 mm; 14 ga / Aluminum to 4 mm; 6 ga |
Punching force | 60 kN |
![Powerlec Vario Plus Powerlec Vario Plus](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2629-7400-00-00
Powerlec Vario Plus
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
![Powerlec Vario Plus Powerlec Vario Plus](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2629-7400-01-00
Powerlec Vario Plus
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
![Powerlec Vario Plus Powerlec Vario Plus](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2629-7401-00-00
Powerlec Vario Plus
Type | Fan kit 92 |
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
![Powerlec Vario Plus Powerlec Vario Plus](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2629-7402-00-00
Powerlec Vario Plus
Type | Fan kit 125 |
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
![Powerman Powerman](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2684-7100-01-01
Powerman
Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 65 kN |
![Powerman Step Powerman Step](/typo3conf/ext/haewa_sitepackage/Resources/Public/pics/blank.gif)
2685-7200-01-01
Powerman Step
Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 65 kN |