The häwa GmbH presents a new range of cooling units with condenser in micro-channel technology and a cooling output from 500 to 3000 watts. Through the micro-channel technology the installation depth is reduced by approximately 50 mm and the efficiency of the device increases since a part of the depth saving is used for achieving a more efficient flow of air around the condenser.
Concerning cooling units with micro-channel technology, the condenser similar to car radiators is designed to be flat which allows significant savings in installation depth. Due to the smaller size less refrigerant is needed (approximately 40 % less than conventional condenser tube-set), which significantly reduces the weight of the cooling units and at the same time contributes to environmental protection. Through the exclusive use of aluminum a better thermal conductivity and higher protection against corrosion can be achieved (conventional condensers in contrast consist of copper and aluminum).
häwa's cooling units with condenser in micro-channel technology have got a lid with the new häwa design and are prepared for extension, installation or partial installation. A mat against fibrous material protects from heavy soiling. Starting from 1400 watts cooling power, the devices offer an integrated evaporation of condensate. Through a display at the front all functions are indicated and also the upper as well as the lower operation temperature can be set. The whole product line is designed for an operation-temperature range from +20 up to +55 degrees Celsius and thanks to CE and cUL approvals perfectly suitable for export.
