0370-6018-50-00
Free-Standing cabinets Stainless steel H370, single door
- Stainless steel
- Free-standing cabinet
- Depth-500 mm
- Protection class IP/Nema/Type: see technical data
- System accessories permit modular extension
Product description
Free-standing cabinets with single or double door design. Available with or without mounting plate. Mounting rails for 100 % utilization of häwa accessories available as option.
Protective grounding according to DIN EN 61439-1, M8x20 studs on all movable and detachable parts as well as on top and bottom frame areas, mounting plate with ground connector screw and cable entry plates with drilling
Flanged edges prevent dust and water from entering when opening the door
Doors with seamlessly foamed gasket can be mounted either at left or right side, standard delivery includes doors hinged on right side, Opening angle 120° can be modified to 180°, Locking: Bar lock, standard with 3 mm double mandrel bolt, Bolted reinforcement and attachment frame of solid square tubes perforated with 4.5 mm holes every 25 mm, From width 800 mm with stop roller
Top plate can be removed, with 4 lifting eyes M12 to DIN 580
Bottom with three-part, adjustable cable entry plate and 10.6 mm mounting holes.
C-flanged mounting plate, adjustable to depth every 25 mm; quick and easy mounting with häwa locking brackets.
Technical data
-
Article number: 0370-6018-50-00
-
Protective conductor connection: according to DIN EN 61439-1
-
Protection class: IP56
Type 1, 12 -
Material: Stainless steel no. 1.4301
-
Authorization: cULus
-
Dimensions: Width : 600 mm Height : 1800 mm Depth : 500 mm
-
Weight: 82 kg
-
Cabinet type: Free standing cabinets
-
Variant: without mounting plate
-
Surface: Externally brushed
-
Sheet thickness: Door: 2 mm(ga)
Frame/Body: 1,5 mm(ga)
Rear wall: 1,5 mm(ga)
Notice
- Rear panel with hinged door or other modifications involve delivery time. Price upon request.
- Attention: Center attachment type 0391-0003-..-00 cannot be combined with vertical mounting rails type 0391-90..-00-03.
- Modular assembly is achieved by using the horizontal/vertical mounting rails.
- Please refer to base drawings for base mounting dimensions.
- Cabinet complete with lifting eyes, top plate, bottom cable entry plate and 1 key
19"-Swing frame type 0318
Combination work plate/diagram pocket
Suitable for width: 600 mm/23,62" (single door)
Suitable for width: 1200 mm/47,24" (double door)
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Door opening limiter for H390/H395, H370/H375 cabinets
Door opening limiter for H390/H395, H370/H375 cabinets
Fluorescent Lamp, Ready for Connection
Fluorescent Lamp, Ready for Connection
Fluorescent Lamp, Ready for Connection
Bases height 100 mm/3.94" for cabinets type H370 and H375
100 mm / 3.94" high base, only for H370 cabinets (flush at the rear side)
Base height 200 mm/7.87" for cabinets type H370 and H375
200 mm / 7.87" high base, only for H370 cabinets (flush at the rear side)
Lateral base rail type 0376
Replacement door for stainless steel cabinets type H370/H375
Rain Cover for Free-Standing Cabinets type H370
Door Switch for Cabinets H3X0/H3X5
Door Contact Switch
Door Contact Switch
The best control cabinets and enclosures are not produced on an assembly line, but through close dialog with our customers. Are you ready to begin?
Then contact your personal häwa consultant today.