0390-6014-40-07
Free-Standing cabinets Sheet steel H390, single door
- Sheet steel
- Free-standing cabinet
- Depth 400 mm
- Protection class IP/Nema/Type: see Technical data
- System accessories permit modular extension
Product description
Free-standing cabinets with single or double door design. Available with or without mounting plate. Mounting rails for 100 % utilization of häwa accessories available as option.
Protective grounding according to DIN EN 61439-1, M8x20 studs on all movable and detachable parts as well as on top and bottom frame areas, mounting plate with ground connector screw and cable entry plates with drilling
Flanged edges prevent dust and water from entering when opening the door
Doors with seamlessly foamed gasket can be mounted either at left or right side, standard delivery includes doors hinged on right side
Opening angle 120° can be modified to 180°
Locking: Bar lock
Standard with 3 mm double mandrel bolt
Bolted reinforcement and attachment frame of solid square tubes perforated with 4.5 mm holes every 25 mm
Top plate can be removed, with 4 lifting eyes M12 to DIN 580
Bottom with three-part, adjustable cable entry plate and 10.6 mm mounting holes
C-flanged mounting plate, adjustable to depth every 25 mm; quick and easy mounting with häwa locking brackets
Technical data
-
Article number: 0390-6014-40-07
-
Protective conductor connection: according to DIN EN 61439-1
-
Protection class: IP55
Type 1, 12 -
Material: Sheet steel
-
Authorization: cULus
-
Dimensions: Width : 600 mm Height : 1400 mm Depth : 400 mm
-
Weight: 61.5 kg
-
Cabinet type: Free standing cabinets
-
Variant: without mounting plate
-
Surface: Powder coating RAL 7035, texture finish
-
Sheet thickness: Door: 2 mm(ga)
Roof angle: 2 mm(ga)
Carrier angle ground group: 2,5 mm(ga)
Frame/Body: 1,5 mm(ga)
Rear wall: 1,5 mm(ga)
Notice
- Rear panel with hinged door or other modifications involve delivery time. Price upon request.
- Attention: Center attachment type 0391-0003-..-00 cannot be combined with vertical mounting rails type 0391-90..-00-03.
- Modular assembly is achieved by using the horizontal/vertical mounting rails.For width 1600/2000, 2 horizontal mounting rails are required.
- Please refer to base drawings for base mounting dimensions.
- By mounting the RainKit (see accessories), UL Type 3R is additionally achieved.
- Cabinet complete with lifting eyes, top plate, bottom cable entry plate and 1 key
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Clip-nuts
Door opening limiter for H390/H395, H370/H375 cabinets
Fluorescent Lamp, Ready for Connection
Fluorescent Lamp, Ready for Connection
Fluorescent Lamp, Ready for Connection
Bases height 3.94" for H390, H395 abd PC2096
100 mm high base for H390 cabinets only (flush with rear side)
Bases height 7.87" for cabinets type H390 and H395
Corner section: 2.5 mm
Covers and cross sections: 1.5 mm
Base height 7.87" only for cabinets type H390 (flush with rear side)
Door Switch for Cabinets H3X0/H3X5
Door Contact Switch
Door Contact Switch
The best control cabinets and enclosures are not produced on an assembly line, but through close dialog with our customers. Are you ready to begin?
Then contact your personal häwa consultant today.