Draw studs and nuts for shaped punches

Draw Studs for Shaped Punches

For punching sheet metals with pumps.
The shaped part of the bolt prevents the punch from rotating to the die.


2623-0712-11-00	for mobile devices	Ø 9,5/9,5 mm/3/8"/3/8"	120 mm	Vierkant 11x12 mm/0.43x0.47"
2683-0000-38-38	for mobile devices	9,5/9,5 mm; 3/8"/3/8"	120 mm	SW 8; WAF 0.31" + 3te Fläche
2683-0000-38-12	for mobile devices	9,5/9,5 mm; 3/8"/3/8"	110 mm	SW 12; WAF 0.47" + 3te Fläche
2683-0719-24-01	for mobile devices	19/19 mm; 3/4"/3/4"	143 mm	Ø 25 mm; 0.98" with 2 guide surfaces
2683-0719-24-16	for mobile devices	19/19 mm; 3/4"/3/4"	153 mm	Ø 25 mm; 0.98" with 2 guide surfaces
2623-0118-00-00	for mobile devices	19/19 mm; 3/4"/3/4"	143 mm	VK 12x12; 0.73x0.73" mm with slot

Nuts for Shaped Punches

The nut secures the punch on the draw stud.


2683-0000-00-12	for mobile devices		19 mm
2683-0000-00-38	for mobile devices	9,5 mm/0,37"	17 mm
2683-0710-10-02	for mobile devices	9,5 mm/0,37"	24 mm
2683-0719-19-01	for mobile devices	19 mm; 3/4"	34 mm
2683-0719-19-03	for mobile devices
2683-0992-03-01	for mobile devices	19 mm; 3/4"

Draw Studs + Nuts for Shaped Punches

For punching cut-outs in sheet metals.
The shaped part of the draw stud prevents twisting of the punch to the die.
The nut secures the punch on the draw stud.

	Remember
2623-0712-12-00	for mobile devices	9,5 mm; 3/8" / M12	124 mm	VK 12x12; 0.73x0.73" mm with slot
2623-0710-10-00	for mobile devices	9,5/9,5 mm; 3/8"/3/8"	109 mm	7-kant, SW 10; WAF 0.39"
2623-0119-00-00	for mobile devices	9,5/19 mm; 3/8"/3/4"	141 mm	Ø 19 mm; 0.75" with groove

Contact for products

Find your personal point of contact

We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now