2605-0611-01-00
Shut-Off Unit
- Same bending angle for serial bending
Product description
Piston stroke limitation for AlCu-Press: bending, trimming
Continuously adjustable piston stroke for constant bending angles owing to the movable cam
Technical data
-
Article number: 2605-0611-01-00
-
Product family: For workshop equipment
-
Version: AlCu-Press: punching, cutting to length and AlCu-Press: complete
-
Bending angle: Continuously adjustable
Notice
- The connection of the shut-off unit must be performed by qualified electricians.
- If you require various different bending angles, it is possible to use several “length adjustment brackets with cam” type 2605-0611-12-00.
- 1 shut-off unit with electrical components for connection to electric hydraulic pump
2605-0611-12-00
Length Adjustment Bracket with Cam
Product range
For workshop equipment
Version
AlCu-Press: punching, cutting to length and AlCu-Press: complete
2605-7102-00-02
AlCu-Press Complete
Suitable for
round punches up to ø 17 mm / 0.67 inch oblong holes up to 13x22 mm / 0.51x0.87 inch
Max. sheet metal thickness
Cross section: copper up to 12x120 mm / 0.47x4.72”; aluminum up to 12x120 mm / 0.47x4.72”
Material up to a cross section of
12x120 mm/0,47x4,72"
Depth stop
Adjustable from 8 to 85 mm / 0.32x3.35”
2605-7602-01-20
AlCu-Press: Bending, Trimming
Application
Bending + trimming
Material thickness
Cross section: copper up to 12x120 mm / 0.47x4.72”; aluminum up to 12x120 mm / 0.47x4.72”
2605-0611-12-00
Length Adjustment Bracket with Cam
Product range
For workshop equipment
Version
AlCu-Press: punching, cutting to length and AlCu-Press: complete
Contact for products
Find your personal point of contact
We are happy to help you.
The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.
