Accessories Bus Bar Processing

Power Supply Unit 3V DC

Power supply for laser module.
With a 1.2 m long cable and plug-in connector.

Order No.	Product range	Version	Output voltage	Electrical connection	notice
2600-2000-60-11	For workshop equipment	Line Laser Module	3 V DC	230 V / 50 Hz

Punching Tool for AlCu-Press

Can be used with the bow punch AlCu-Press punching
For punching solid copper or aluminum rails
With sharpened lathe point for easy positioning of the punch position
Quick, precise punching, burr formation is depending on the material quality


2605-7700-06-50	For workshop equipment	ø 6,5 mm	6 mm/0,24"
2605-7700-08-50	For workshop equipment	ø 8,5 mm	8 mm/0,31"
2605-7700-10-50	For workshop equipment	ø 10,5 mm	10 mm/0,39"
2605-7700-12-50	For workshop equipment	ø 12,5 mm/ø 0,49"	12 mm/0,47"
2605-7700-13-00	For workshop equipment	ø 13 mm	12 mm/0,47"
2605-7700-14-50	For workshop equipment	ø 14,5 mm/ø 0,57"	12 mm/0,47"
2605-7700-17-00	For workshop equipment	ø 17 mm	12 mm/0,47"

Punching tool AlCu-Press ø 10.5 mm for laminated copper

Can be used with the bow punch AlCu-Press punching
For punching laminated copper rails
With sharpened lathe point for easy positioning of the punch position
Quick, precise punching, burr formation is depending on the material quality

Order No.	Product range	Version	Size	Max. sheet metal thickness	notice
2605-7750-10-50	For workshop equipment	for processing laminated copper bars	ø 10,5 mm	10 mm/0,39"

Alcu-Press Wiper

The rails are fixed and protected against bulging via a plate with gas-operated springs.
The installed line laser remains functional.

Order No.	Product range	Version	notice
2605-7500-25-00	For workshop equipment	For AlCu-Press punching, cutting to length / AlCu-Press complete

Cutting Tools

Tool for AlCu-Press for cutting solid copper or aluminum materials up to 120x12 mm at right angles
When cutting, a scrap of 10 mm width is produced.

Order No.	Product range	For processing	Max. material cross section	notice
2605-0508-01-20	For workshop equipment	solid copper or aluminum materials	120x12 mm/4,72x0,47"

Bending Tool

Tool for AlCu-Press for bending copper or aluminum materials up to 120 x 12 mm
90° bending angle is possible, with integrated angle display.

Order No.	Product range	Version	For processing	Max. material cross section	Bending angle	notice
2605-0601-01-20	For workshop equipment	AlCu-Press: punching, cutting to length and AlCu-Press: complete	solid copper or aluminum materials	120x12 mm/4,72x0,47"

Trimming Tool

Tool for AlCu-Press for trimming copper or aluminum materials up to 120 x 12 mm
Trimming is possible up to max. 40 mm

Order No.	Product range	For processing	Max. material cross section	Trimming	notice
2605-0602-01-20	For workshop equipment	solid copper or aluminum materials	120x12 mm/4,72x0,47"	Max. 40 mm

Die Holder ø 40 mm for AlCu-Press

Dieholder for punching tools in AlCu Press punching, cutting to length
Clamping by means of a threaded pin

Order No.	Product range	Type	notice
2605-0507-01-15	For workshop equipment	For AlCu-Press punching, cutting to length / AlCu-Press complete

Adapter AlCu-Press: Punching

Adapter for round punches of punching tools in AlCu Press punching, cutting to length
The punch is guided through the adapter and then inserted in the piston shaft.
Clamping by means of a threaded pin

Order No.	Product range	Version	notice
2605-0507-01-10	For workshop equipment	For AlCu-Press punching, cutting to length / AlCu-Press complete

Wipers for AlCu-Press

Easy wiping of the workpiece from the punch
The different punch diameters require suitable rubber wipers


2605-0900-06-50	For workshop equipment	For mounting round punches in Alcu-Press	6.5 mm
2605-0900-08-50	For workshop equipment	For mounting round punches in Alcu-Press	8.5 mm
2605-0900-10-50	For workshop equipment	For mounting round punches in Alcu-Press	10.5 mm
2605-0900-13-00	For workshop equipment	For mounting round punches in Alcu-Press	13 mm
2605-0900-17-00	For workshop equipment	For mounting round punches in Alcu-Press	17 mm

Shut-Off Unit

Piston stroke limitation for AlCu-Press: bending, trimming
Continuously adjustable piston stroke for constant bending angles owing to the movable cam

Order No.	Product range	For processing	Bending angle	notice
2605-0611-01-00	For workshop equipment	solid copper or aluminum materials	Continuously adjustable

Length Adjustment Bracket with Cam

The length adjustment bracket with cam enables an individual bending of the different bending angles
Several brackets prevent a frequent re-adjustment of various bending angles

Order No.	Product range	Version	notice
2605-0611-12-00	For workshop equipment	AlCu-Press: punching, cutting to length and AlCu-Press: complete

Length Stop For AlCu-Press Punching and Cutting to Length

Flanged sheet steel with wide support surface and 2 m measuring scale with deeply lasered scaling on a stainless steel strip to be mounted to the AlCu-Press: punching and cutting to length
Including a combined tilt stop for punching and cutting to length with clamping lever and a height adjustable floor support

Order No.	Product range	Version	Setting range	notice
2605-0700-01-00	For workshop equipment	For AlCu-Press punching, cutting to length / AlCu-Press complete	Continuously adjustable from 10 mm to 1900 mm

Length Stop for AlCu-Press Bending and Trimming

Stop with mounting flange to be mounted to the AlCu-Press: bending and trimming
Continuously adjustable tilt stop with clamping lever
Measuring scale with deeply lasered scaling on a stainless steel strip

Order No.	Product range	Version	Setting range	notice
2605-0700-02-00	For workshop equipment	AlCu-Press: punching, cutting to length and AlCu-Press: complete	Continuously adjustable from 40 mm/1,57" to 1 000 mm/39,37"

Line Laser Module

The laser projects a 0.3 mm wide line in the Y-direction.
Thus only the X-axis has to be marked, which shortens the preparation time.

Order No.	Product range	Version	Required input voltage	Laser class	notice
2600-2000-00-11	For workshop equipment	For AlCu-Press punching, cutting to length / AlCu-Press complete	3 V DC	1

Contact for products

Find your personal point of contact

We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now