Small Fan Heater Type HG with PTC-Resistor

3184-0250-02-23

Small Fan Heater Type HG with PTC-Resistor

  • Small compact design
  • Ensure a minimum operating temperature
  • Prevent condensation
  • Advantages of heaters with PTC-resistor: Dynamic heating up, temperature limiting, wide voltage range
  • Advantages fan heaters: small compact design, quiet operation

Product description

Cabinet heaters are used for heating up the air inside a control cabinet. Häwa offers a wide range of cabinet heaters from 10 to 1200 W to optimize the functionality of electric and electronic components, to ensure a minimum operating temperature and for frost monitoring in case of low ambient temperatures and high humidity.

Fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components.

The heater is connected using the internal terminal connectors.

The small size makes it ideal for use in enclosures where space is at a premium.

Dynamic heating up through PTC-resistor (PTC-resistor, temperature limiting).

Axial fan with ball bearing provides forced air circulation inside the cabinet.

Technical data

  • Article number: 3184-0250-02-23
  • Frequency: 50 Hz/60 Hz
  • Protection class: IP20
  • Protection class: II (double insulation)
  • Use/storage temperature: from : -45 °C  to : +70 °C 
  • Application/storage humidity: max. 90% relative humidity (non-condensing)
  • Surface temperature: at 20°C (68° F) ambient temperature (except upper grid): max. +50° C (122° F)
  • Heat output: 250 W
  • MONTAGE: clip for snap-on attachment
  • Electrical connection: 3-pin 2.5 mm2 terminal, max. tightening torque 0.8 Nm
  • Heating element: PTC-resistor temperature limiting
  • Switch-on current: 9 A
  • SICHERUNG: 10 A (slow-blow)
  • Authorization: CE; cURus
  • Weight: 0.5 kg
  • Dimensions: Width : 85 mm  Height : 90 mm  Depth : 111 mm 
  • Surface: housing: black plastic, UL94 V-0
  • Nominal voltage: 230 V AC
  • Mounting position: Vertical air flow (air outlet at top)
  • type: HG 250

Notice

  • The specified heating capacity refers to an ambient temperature of 20° C (68° F).
  • A safety clearance of 50 to 100 mm to the adjacent components shall be observed (according to the corresponding operation manual).
  • Versions with screw flange attachment are available upon request.
  • 1 fan heater
Fix-Thermostat FTO
3150-3015-00-00
Fix-Thermostat FTO
Contact type
Snap-action contact
Temperature range
Switch-off temperature: +15 °C, Starting temperature: +5 °C
Fix-Thermostat FTO
3150-3025-00-00
Fix-Thermostat FTO
Contact type
Snap-action contact
Temperature range
Switch-off temperature: +25 °C, Starting temperature: +15 °C
Small Compact Thermostat with Thumbwheel Setting Dial
3150-1060-02U30
Small Compact Thermostat with Thumbwheel Setting Dial
Control system
Opened con. (heating)
Contact type
Snap-action contact
3150-0060-02-30
Contact type
Change-over
Temperature range
from: 0 °C/0 °F to: +60 °C/+140 °F
Mechanical Humidity Controller
3150-0030-02-30
Mechanical Humidity Controller
Setting range
40-90% relative humidity
Electronic Hygrotherm ETF012
3150-0060-02-23-01
Electronic Hygrotherm ETF012
Contact type
Change-over
Setting range
50 to 90% rF, +0 °C to +60 °C
Small Fan Heater Type HG with PTC-Resistor
Small Fan Heater Type HG with PTC-Resistor
Cabinet heaters are used for heating up the air inside a control cabinet. Häwa offers a wide range of cabinet heaters from 10 to 1200 W to optimize the functionality of electric and electronic components, to ensure a minimum operating temperature and for frost monitoring in case of low ambient temperatures and high humidity.
Fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components.
The heater is…

Remember
230 V AC
150 W
CE; cURus
115 V AC
150 W
CE; cURus
230 V AC
250 W
CE; cURus
115 V AC
250 W
CE; cURus
230 V AC
400 W
CE; cURus
115 V AC
400 W
CE; cURus

Contact for products
Find your personal point of contact
We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now