Cable gland

Plug-in cable gland

This cable gland is installed from only one side of the enclosure, without locking it on the inside of the enclosure. Very easy to install: plug in, snap in, tighten.
No problem to install on double-wall enclosures
Wide sealing and clamping range
Can be installed in through-bores (dia. = 0.1 to 0.3 mm larger than thread diameter)
Integrated strain relief

		Remember
2331-0020-16-00	M16
2331-0020-20-00	M20
2331-0020-25-00	M 25
2331-0020-32-00	M 32

Cable gland IP68

Wide sealing and clamping range
Integrated strain relief


2331-0330-12-15	metric	M 12 x 1,5	3 mm	IP68
2331-0330-16-15	metric	M 16 x 1,5	5 mm	IP68
2331-0330-20-15	metric	M 20 x 1,5	8 mm	IP68
2331-0330-25-15	metric	M 25 x 1,5	11 mm	IP68
2331-0330-32-15	metric	M 32 x 1,5	15 mm	IP68
2331-0330-40-15	metric	M 40 x 1,5	19 mm	IP68
2331-0330-07-00	PG	PG 7	3 mm	IP68
2331-0330-09-00	PG	PG 9	4 mm	IP68
2331-0330-11-00	PG	PG 11	5 mm	IP68
2331-0330-40-15	PG	PG 13,5	6 mm	IP68
2331-0330-16-00	PG	PG 16	10 mm	IP68
2331-0330-21-00	PG	PG 21	13 mm	IP68
2331-0330-29-00	PG	PG 29	18 mm	IP68
2331-0330-36-00	PG	PG 36	22 mm	IP68
2331-0330-42-00	PG	PG 42	30 mm	IP68

Cable gland IP55

Application in installation areas without particular requirements.


2331-0063-12-15		M 12 x 1,5		IP55
2331-0063-16-15		M 16 x 1,5		IP55
2331-0063-20-15		M 20 x 1,5		IP55
2331-0063-20-16		M 20 x 1,5		IP55
2331-0063-20-17		M 20 x 1,5		IP55
2331-0063-25-15		M 25 x 1,5		IP55
2331-0063-25-16		M 25 x 1,5		IP55
2331-0063-32-15		M 32 x 1,5		IP55
2331-0063-32-16		M 32 x 1,5		IP55
2331-0063-40-15		M 40 x 1,5		IP55
2331-0063-50-15		M 50 x 1,5		IP55
2331-0063-07-00	PG	PG 7	5 mm	IP55
2331-0063-09-00	PG	PG 9	6 mm	IP55
2331-0063-11-00	PG	PG 11	8 mm	IP55
2331-0063-13-00	PG	PG 13,5	10 mm	IP55
2331-0063-16-00	PG	PG 16	12 mm	IP55
2331-0063-21-00	PG	PG 21	15 mm	IP55
2331-0063-29-00	PG	PG 29	24 mm	IP55
2331-0063-36-00	PG	PG 36	31 mm	IP55
2331-0063-42-00	PG	PG 42	39 mm	IP55
2331-0063-48-00	PG	PG 48	45 mm	IP55

Cable gland with very high strain relief

Provides also good bending protection. Very high tightening forces due to the separate strain relief.


2331-0226-12-15	metric	M 12 x 1,5	5.5 mm	IP55
2331-0226-16-15	metric	M 16 x 1,5	5.5 mm	IP55
2331-0226-20-15	metric	M 20 x 1,5	7.5 mm	IP55
2331-0226-20-16	metric	M 20 x 1,5	9 mm	IP55
2331-0226-20-17	metric	M 20 x 1,5	10 mm	IP55
2331-0226-25-15	metric	M 25 x 1,5	10 mm	IP55
2331-0226-25-16	metric	M 25 x 1,5	13 mm	IP55
2331-0226-32-15	metric	M 32 x 1,5	13 mm	IP55
2331-0226-32-16	metric	M 32 x 1,5	18 mm	IP55
2331-0226-40-15	metric	M 40 x 1,5	18 mm	IP55
2331-0226-09-00	PG	PG 9	5.5 mm	IP55
2331-0226-11-00	PG	PG 11	7.5 mm	IP55
2331-0226-13-00	PG	PG 13,5	9 mm	IP55
2331-0226-16-00	PG	PG 16	10 mm	IP55
2331-0226-21-00	PG	PG 21	13 mm	IP55

Hexagon nut

To secure cable glands and other components.

		Remember
2331-0002-12-15	M 12 x 1,5
2331-0002-16-15	M 16 x 1,5
2331-0002-20-15	M 20 x 1,5
8101-203-0901.03	M 22 x 1,5
2331-0002-25-15	M 25 x 1,5
2331-0002-32-15	M 32 x 1,5
2331-0002-40-15	M 40 x 1,5
2331-0002-07-00	PG 7
2331-0002-09-00	PG 9
2331-0002-11-00	PG 11
2331-0002-13-00	PG 13,5
2331-0002-16-00	PG 16
2331-0002-21-00	PG 21
2331-0002-29-00	PG 29
2331-0002-36-00	PG 36
2331-0002-42-00	PG 42
2331-0002-48-00	PG 48
2331-0002-50-16	M 50 x 1,5
2331-0002-63-16

Screwed sealing plug

Used to close unused threaded or through-bores.

		Remember
2331-0010-12-15	A=M12x1,5
2331-0010-16-15	A=M16x1,5
2331-0010-20-15	A=M20x1,5
2331-0010-25-15	A=M25x1,5
2331-0010-32-15	A=M32x1,5
2331-0010-40-15	A=M40x1,5
2331-0010-50-15	A=M 50x1,5
2331-0010-63-15	A=M63x1,5
2331-0010-11-00	A=PG 11
2331-0010-11-00	A=PG 13,5
2331-0010-16-00	A=PG 16
2331-0010-21-00	A=PG 21

Sealing ring

For better sealing at connecting thread.
Also suitable for slightly uneven surfaces.

		Remember
2331-0003-07-00	M 12; PG 7
2331-0003-16-15	M16
2331-0003-13-00	M 20; PG 13,5
2331-0003-25-15	M 25
2331-0003-32-15	M 32
2331-0003-40-15	M 40
2331-0003-09-00	PG 9
2331-0003-11-00	PG 11
2331-0002-16-00	PG 16

Cable gland, nickel-plated

Easy-to-install gland with good sealing and clamping range.
To be used with high mechanical and chemical stability requirements.
Integrated strain relief.


2330-0506-12-15	metric	M 12 x 1,5	3 mm	IP68
2330-0506-16-15	metric	M 16 x 1,5	5 mm	IP68
2330-0506-20-15	metric	M 20 x 1,5	9 mm	IP68
2330-0506-25-15	metric	M 25 x 1,5	11 mm	IP68
2330-0506-32-15	metric	M 32 x 1,5	14 mm	IP68
2330-0506-40-15	metric	M 40 x 1,5	19 mm	IP68
2330-0018-09-08	PG	PG 9	5 mm	IP65
2330-0018-11-10	PG	PG 11	7 mm	IP65
2330-0018-13-15	PG	PG 13,5	8 mm	IP65
2330-0018-16-12	PG	PG 16	8 mm	IP65
2330-0603-20-15	metric	M 20 x 1,5	8 mm	IP55
2330-0603-25-15	metric	M 25 x 1,5	9 mm	IP55
2330-0603-25-15	metric	M 32 x 1,5	17 mm	IP55
2330-0603-32-15	metric	M 40 x 1,5	17 mm	IP55

Cable gland with very high pressure relief, nickel-plated

Easy-to-install gland with good sealing and clamping range.
To be used with high mechanical and chemical stability requirements. Very high tightening forces due to the separate strain relief.

		Remember
2330-0196-12-15	M 12 x 1,5
2330-0196-16-15	M 16 x 1,5
2330-0196-20-15	M 20 x 1,5
2330-0196-25-15	M 25 x 1,5
2330-0196-32-15	M 32 x 1,5
2330-0196-40-15	M 40 x 1,5
2330-0196-09-05	PG 9
2330-0196-11-05	PG 11
2330-0196-13-05	PG 13,5
2330-0196-16-05	PG 16
2330-0196-21-05	PG 21
2330-0196-29-05	PG 29
2330-0196-36-05	PG 36

Hexagon nut

To secure cable glands and other components.
To be used with high mechanical and chemical stability requirements.


2330-0002-12-15	brass	M 12 x 1,5
2330-0002-16-15	brass	M 16 x 1,5
2330-0002-20-15	brass	M 20 x 1,5
2330-0002-25-15	brass	M 25 x 1,5
2330-0002-32-15	brass	M 32 x 1,5
2330-0002-40-15	brass	M 40 x 1,5
2330-0002-07-05	brass	PG 7
2330-0002-09-05	brass	PG 9
2330-0002-11-05	brass	PG 11
2330-0002-13-05	brass	PG 13,5
2330-0002-16-05	brass	PG 16
2330-0002-21-05	brass	PG 21
2330-0002-29-05	brass	PG 29
2330-0002-36-05	brass	PG 36
2330-0002-42-05	brass	PG 42
2330-0002-48-05	brass	PG 48

Screwed sealing plug

To close unused threaded or through-bores.


2330-0101-12-15	brass	M 12 x 1,5
2331-0101-16-15	brass	M 16 x 1,5
2331-0101-20-15	brass	M 20 x 1,5
2331-0101-25-15	brass	M 25 x 1,5
2331-0101-32-15	brass	M 32 x 1,5
2331-0101-40-15	brass	M 40 x 1,5
2330-0010-07-00	brass	PG 7
2330-0010-09-00	brass	PG 9
2330-0010-11-00	brass	PG 11
2330-0010-13-00	brass	PG 13,5
2330-0010-16-00	brass	PG 16
2330-0010-21-00	brass	PG 21
2330-0010-29-00	brass	PG 29

Reducer

To reduce a threaded or through-bore to a smaller thread size.

		Remember
2330-0011-07-05	A=PG 11 B=PG 7
2330-0011-09-05	A=PG 11 B=PG 9
2330-0013-09-05	A=PG 13,5 B=PG 9
2330-0013-11-05	A=PG 13,5 B=PG 11
2330-0016-09-05	A=PG 16 B=PG 9
2330-0016-11-05	A=PG 16 B=PG 11
2330-0016-13-05	A=PG 16 B=PG 13,5
2330-0021-11-05	A=PG 21 B=PG 11
2330-0021-13-05	A=PG 21 B=PG 13,5
2330-0021-16-05	A=PG 21 B=PG 16
2330-0029-21-05	A=PG 29 B=PG 21
2330-0042-29-05	A=PG 42 B=PG 29
2330-0016-20-00	A=PG 16 B=M20x1,5
2330-0021-25-00	A=PG 21 B=M25x1,5
2330-0029-25-00	A=PG 29